Uniden UH8080S Owner'S Manual Download

Page: 30 / 52

Operation

UNIDEN UH8080S

UHF CB Transceiver

Backlight Colour

1. Press

[MENU]

12 times.

The current Backlight colour

(CLEAR,

BLUE, RED, PURPLE, GREEN, CYAN

or YELLOW)

setting flashes.

2. Press

to change to the desired

colour setting.

3. Press and hold

[MENU]

to save &

exit from the menu mode

Backlight Level

1. Press

[MENU]

13 times.

The Backlight level

(LIGHT)

setting flashes.

2. Press

to change the setting

between OFF, 01, 02 and 03.

3. Press and hold

[MENU]

to save &

exit from the menu mode.

LCD Contrast

1. Press

[MENU]

14 times. The

LCD Contrast setting flashes.

2. Press

to change the setting

between 01 (low contrast) to

10 (high contrast).

3. Press and hold

[MENU]

to save &

exit from the menu mode.

NOTE

If a button is not pressed within 10 seconds the UHF CB Radio will

automatically exit the Menu Mode.

Summary of Contents for UH8080S





















































Search results

Summary of Contents for UH8080S

Reviews:

Related manuals for UH8080S

Brands by name

Popular brands

Uniden UH8080S, Owner'S Manual

Search results

Summary of Contents for UH8080S

Reviews:

Related manuals for UH8080S

Brands by name

Popular brands