3. Press
[MENU]
one more time.
4. Press
/
to select the desired Subcode (CTCSS or DCS).
NOTE
If a button is not pressed within 10 seconds the UHF CB Radio will
automatically exit the Menu Mode.
5. Press and hold the
[MENU]
to save and exit from the Menu Mode.
Open Scan (OS) Mode
All UHF-CB, user-programmed extra RX channels, Police and Fire & Ambulance
frequencies have been added to the OS SCAN Memory for convenience. To add/remove
channels from OS SCAN Memory, refer to p.22.
Allows continuous scanning of all selected channels. If an active channel
is found, scanning will stop on that channel. If the received signal ceases, the unit will
wait 3 seconds for the signal to return, otherwise scanning resumes.
After transmission in scan mode, the unit will wait 20 seconds for the signal to return,
otherwise scanning resumes.
To select OS Scan Mode:
1. Press
[MENU]
three times.
The SCAN setting flashes.
2. Press
/
to change the setting to OS.
3. Press and hold
[MENU]
to save and exit from the Menu mode.
24
UNIDEN UH8080S
UHF CB Transceiver
