Operation - Special Features
36
UNIDEN UH8055S
UHF CB Transceiver
Instant Replay
The Instant Replay feature automatically records up to 1 minute
of received signal(s) which can be instantly replayed (through the
speaker) by pressing
[REPLAY]
.
Instant Replay automatically records receive signal(s) in the following
modes;
• CB & Extra RX channel, Police and Fire (& Ambulance) channel mode
• Scan Mode
• Close Call RF Capture mode
Instant Replay does not record when in monitor mode (SQT-0 setting in normal channel
mode).
Press
[REPLAY]
on the base unit or Speaker MIC
at anytime to;
1. Playback the most recent received signal. OR
2. Playback the most recent recorded signal in the replay buffer (if Instant Replay
automatic receive record was turned Off, see Turning Instant Replay On/Off below).
During playback the display shows REPLAY and the number of the currently playing
recording.
After the most recent received signal has been played back, a long confirmation tone
sounds and the radio returns to the previous mode.
During playback older recordings can be accessed by turning the Rotary Channel
Selector or FF/REW on Speaker MIC to skip forward/back between recordings stored
within the 1 minute buffer. The record number indicates which discrete recording is
currently being replayed.
NOTE
• Received signals shorter than 500ms are not recorded.
• Automatic recording of receive signal(s) is temporarily suspended
during Instant Replay playback.
• Older recordings are automatically overwritten when new recordings
are stored.
• Most received communications are short and the 1 minute buffer may
contain several recordings.
• Transmissions (TX) are not recorded.
Turning Instant Replay On/Off
Instant Replay is ON by default. The
icon displays to indicate Instant Replay
automatic record is On.
Press and hold
[REPLAY]
to turn Instant Replay On/Off. Two beep tones sound.
Turn Instant Replay Off if you want to prevent the current 1 minute of recordings from
being overwritten.
