Uniden UH7700NB Owner'S Manual Download

Page: 51 / 57

UNIDEN Model uh710sx/uh720sx UHF CB Radio

OPERATION

Room Monitor can be temporarily disabled by pressing

or holding

CALL

SCAN

If no further operation is performed for 45 seconds then the temporary disable
mode ends and Room Monitor mode re-activates.

1. Press

ENT

MENU

six times.

2. Press

to select desired setting.

The 5 Room Monitor levels are from 1 (High sensitivity) to 4 (Low

sensitivity) and Off.

3. Press and hold

ENT

MENU

to save and exit.

• If using this feature as Baby Monitor please note it is not a

replacement for regularly checking the safety and security

of children.

• The operating time is limited to the remaining charge of the

battery and is not suitable for continuous overnight use.

• If there is any input at EXT SP MIC JACK, Room Monitor

automatically turns off.

Busy Channel Lockout

This feature prevents accidental transmission on a busy channel. For example,
BCL is used when CTCSS or DCS is selected to prevent transmission when the
radio detects a transmission from another unit using the same CTCSS or DCS
code.
1. Press

ENT

MENU

seven times. The current BCL setting flashes.

2. Press

to select desired setting.

3. Press and hold

ENT

MENU

to save and exit.

Summary of Contents for UH7700NB


























































Search results

Summary of Contents for UH7700NB

Reviews:

Related manuals for UH7700NB

Brands by name

Popular brands

Uniden UH7700NB, Owner'S Manual

Search results

Summary of Contents for UH7700NB

Reviews:

Related manuals for UH7700NB

Brands by name

Popular brands