background image

18

UNIDEN Model  uh710sx/uh720sx UHF CB Radio

OPERATION

Priority Channel Watch During Group Scan

The feature allows user to monitor the Instant Priority channel (see page 19)

every 1.5 secs during Group Scanning. The Priority Channel can also be moni-

tored with Dual Watch, see page 19. 

 

1.   Press 

ENT

MENU

 three times. 

PRI 

 

setting flashes.

2.   Press 

 or 

 to change the  

 

selection. 

3.   Press and hold 

ENT

MENU

 to 

 

save and exit.

Programming Scan Channels

1.   Select which Scanning Mode you wish to use on the channel OS or GS  

 

Mode.

 

 

 

OS is indicated by the absence of the 

GS

 icon.

2.   Select the channel you want to store by pressing 

 or 

.

3.   Press 

CTCSS

MEM

  to store. 

 

M

 icon appears.

4.   To remove the channel from Memory, Press 

CTCSS

MEM

 to remove.  

 

M

 icon disappears. 

Drop-Out Delay

While scanning, the radio stops at a busy channel and receives a signal. When 
the received signal is over, the unit will wait for 3 seconds for the return of the 
signal, otherwise, the radio resumes scanning.

Summary of Contents for UH7700NB


























































Reviews: