Uniden UH5045 Owner'S Manual Download

Page: 3 / 40

The Uniden UH5045 is designed to provide you with years of trouble free service. Its

rugged components and materials are capable of withstanding harsh environments.

Please read this Operating Manual carefully to ensure you gain the optimum

performance of the unit.

NOTE

The citizen band radio service is licenced in Australia by ACMA

Radio-communications (Citizen Band Radio Stations) Class Licence

and in New Zealand by MBIE General User Licence for Citizen Band

Radio and operation is subject to conditions contained in those licenses.

Features

• Narrow Band (NB) 80 Channel Radio*

• Transmission Power 5W

• 50 Programmable Receive channels

(450 - 520MHz in 12.5khz steps)

• Built-in AVS Circuitry

†

• LCD Display with Backlight

• LCD Backlight brightness control

(“off”, “01”, “02”, “03”)

• Compact Size

• Signal Strength/ Power Meter

• Instant Channel Programming

• One touch Instant Channel recalling

• Dual Watch with Instant Channel

• Duplex Capability (from CH01 - CH08

and CH41 - CH48 per channel)

• Group Scan and Priority Channel

Watch

• Open Scan

• Scan Channel Memory On/Off

separately with Open Scan, Group

Scan

• Rotary Channel Select

• Busy Channel Lock-out Function

• Roger Beep Function On/Off

• 5 Different Call Tones

• 38 Built-in CTCSS (Continuous Tone

Coded Squelch System) and 104

additional DCS (Digital Coded Squelch)

codes that are user selectable

• Volume Control with Power On/Off

Push Switch

• Optional Remote LCD Speaker

Microphone (Remote SPK/MIC) and

Extension Cable

• Front and Rear MIC Jacks for

increased mounting options

• Variable Squelch Level adjust or Auto

Squelch with optional Remote SPK/

MIC

* Refer to p.31 - p.33 for channel

information

†

AVS - Automatic Volume Stabilizer

detects and manages incoming

audio to comparable levels.

Introduction

UNIDEN UH5045

UHF CB Transceiver

Summary of Contents for UH5045









































Search results

Summary of Contents for UH5045

Reviews:

Related manuals for UH5045

Brands by name

Popular brands

Uniden UH5045, Owner'S Manual

Search results

Summary of Contents for UH5045

Reviews:

Related manuals for UH5045

Brands by name

Popular brands