UNIDEN Model uh089sx UHF CB Radio
Operation
Setting the Squelch
Turn the Unit ON by
rotating the volume control
clockwise. Turn the outer
ring of the control to adjust
the Squelch.
You must select a
channel which is not in use before setting the
SQUELCH control. (see below for "Selecting a Channel").
Think of the squelch
control as a gate. If you
turn Squelch fully
clockwise it raises the
'Squelch gate' so high that
no signals get through.
If you turn the Squelch
fully counterclockwise it
lowers the 'Squelch Gate'
to the extent that all
signals get through -
weak, medium and strong
signals and noise.
To set the 'Squelch Gate'
to the desired level, turn
the squelch knob
counterclockwise until you
hear noise. Then carefully
turn the Squelch knob
clockwise until the noise
fades. Now only strong
signals get through.
Monitor
Press
to open the squelch and receive all weak
signals.
Press
again momentarily to cancel.
MENU
ENTER
MON
DCS/CTCSS
MON
MON
DCS/CTCSS
MON
MENU
ENTER
Selecting a Channel
Turn the Rotary Channel Selector to
select the desired channel.
For your reference a list of the available
channels, corresponding frequencies and
guidelines for their use is printed on page
12. For Australia, Channels 05 and 35 are
reserved for Emergency Calls.
6
