Uniden UDW-20000 Series Owner'S Manual Download Page 24

One-year Limited Warranty

Important: Evidence of original purchase is required for warranty service.

WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”) ELEMENTS OF WARRANTY: Uniden warrants, for 
one year, to the original retail owner, this Uniden Product to be free from defects in materials & craftsmanship 
with only the limitations or exclusions set out below.
WARRANTY DURATION: This warranty to the original user shall terminate & be of no further effect 12 months 
after the date of original retail sale. The warranty is invalid if the Product is (A) damaged or not maintained as 
reasonable or necessary, (B) modified, altered, or used as part of any conversion kits, subassemblies, or any 
configurations not sold by Uniden, (C) improperly installed, (D) serviced or repaired by someone other than 
an authorized Uniden service center for a defect or malfunction covered by this warranty, (E) used in any 
conjunction with equipment or parts or as part of any system not manufactured by Uniden, or (F) installed or 
programmed by anyone other than as detailed by the owner’s manual for this product.
STATEMENT OF REMEDY: In the event that the product does not conform to this warranty at any time while this 
warranty is in effect, warrantor will either, at its option, repair or replace the defective unit & return it to you 
without charge for parts, service, or any other cost (except shipping & handling) incurred by warrantor or its 
representatives in connection with the performance of this warranty. Warrantor, at its option, may replace the 
unit with a new or refurbished unit.
THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE & ENTIRE WARRANTY PERTAINING TO THE PRODUCT 
& IS IN LIEU OF & EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS, 
IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF 
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER OR PROVIDE 
FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not 
allow this exclusion or limitation of incidental or consequential damages so the above limitation or exclusion 
may not apply to you.
LEGAL REMEDIES: This warranty gives you specific legal rights, & you may also have other rights which vary 
from state to state. This warranty is void outside the United States of America & Canada. 
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after following the instructions in the owner’s 
manual you are certain that the Product is defective, pack the Product carefully (preferably in its original 
packaging). Disconnect the battery from the Product & separately secure the battery in its own separate 
packaging within the shipping carton. The Product should include all parts & accessories originally packaged 
with the Product. Include evidence of original purchase & a note describing the defect that has caused you to 
return it. The Product should be shipped freight prepaid, by traceable means, to warrantor at:
Uniden America Service 
4700 Amon Carter Blvd. 
Fort Worth, TX 76155

Summary of Contents for UDW-20000 Series

























Reviews: