manualshive.com logo in svg

Uniden UDVR45-4, Owner'S Manual

Share
Download
Uniden UDVR45-4 Owner'S Manual Download Page 27

27

FIELD

DESCRIPTION

Max Online 

Users

Set the number of network users visiting the device.

Video Output

User can select VGA 800x600, 1024x768, 1280x720, 

or 1280x1024 output modes.

Language

Select display language.

Logout After 

[Minutes]

When there is no action after this set time , the 

system automatically logs out.

Startup Wizard

Display Wizard (or not) when the system is turned 

on.

Date & Time Tab

In this interface, set the date format, time format, time zone; you can 
also adjust the system time manually.

Note: the default time zone of the system is GMT-05:00.

Select 

Sync Time with NTP Server

 to the correct time. Set the network 

server time as well.

Uniden strongly recommends setting the network date and 
time to have an accurate date and time stamp on recorded 
videos.

FIELD

DESCRIPTION

Date Format

Set date format

Time Format

12 or 24 hour format

Time Zone

Set time zone in GMT format
•  GMT-05:00 - Eastern Standard (Default)
•  GMT-06:00 - Central Standard
•  GMT-07:00 - Mountain Standard
•  GMT-08:00 - Pacific Standard
•  GMT-09:00 - Yukon Standard
•  GMT-10:00 - Alaska-Hawaii Standard

Summary of Contents for UDVR45-4





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands