manualshive.com logo in svg

Uniden UDVR45-4, Owner'S Manual

Share
Download
Uniden UDVR45-4 Owner'S Manual Download Page 23

23

MENU ITEM DESCRIPTION

PTZ

This icon controls a Point/Tilt/Zoom (PTZ) camera, if 

installed (not included). It can set the PTZ camera’s 

address, Baud rate, and Protocol, and help you set 

camera movement patterns.

Snap

The UDVR can take snapshots of live video 

automatically at specific intervals. Set these intervals 

in the Snap tab of the 

Main Menu/Setup/Record

 

screen. Once that is set up, right click in the live view 

quadrant of the camera you want to take snapshots. 

The System menu displays. Select 

Snap

 and that 

camera’s snapshot cycle activates. A camera icon 

displays.

Start Record 

Stop Record

Start and stop recording for a specific channel (the 

channels showing Live video).

Playback

Play the video files in the hard disk. You can also 

search the video according to time and event under 

Main Menu/Search

 to enter the playback interface.

Main Menu

Provides extensive system configuration and 

operation setup. The Main Menu and its submenus 

are described in detail beginning on page 24.

Summary of Contents for UDVR45-4





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands