Connect Power
1. Insert the AC adapter power plug into the
camera’s DC adaptor input jack.
2. Plug the other end into a 120 volt AC (standard
indoor) power outlet or surge protector.
3. Press
POWER
and make sure the green power
LED
turns on. If it doesn’t, try reconnecting the
AC adapter, making sure the power outlet isn’t
controlled by a wall switch.
PLAYING LULLABIES
1. To control the lullabies from the monitor, decide
which camera you want to play lullabies and
make it the full screen live view camera.
2. Press
LULLABY PLAY/STOP
on the monitor or
camera. The system plays Lullaby #1 then
repeats it.
3. Press
LULLABY SKIP
to skip to Lullaby #2. The
system plays Lullaby #2 then repeats it.
4. Press
LULLABY SKIP
to skip to Lullaby #3. The
system plays Lullaby #3 then repeats it.
5. Press
LULLABY SKIP
to skip to Lullaby #4. The
system plays Lullaby #4 then repeats it.
6. Press
LULLABY SKIP
to skip to Lullaby #1. The
system plays Lullaby #1 then cycles through all
lullabies.
7. Press
▲VOL
and
▼VOL
on the monitor or camera
to adjust the volume. Press
▼VOL
all the way
down on the monitor to mute the lullaby playing
through the monitor.
#
Refer to your UBR223 or UBR243 system
owner’s manual for further details.
PRODUCT SPECIFICATION
GENERAL
Operating frequency
range
2.400 ~ 2.4835GHz
TX power
15dBm (typical)
Spread spectrum
FHSS
