background image

IMPORTANT SAFETY  

PRECAUTIONS

 

#

This manual contains important information 

about this product’s operation. If you are 

installing this product for others, you must 

leave this manual or a copy with the end user.

When using your equipment, always follow basic 

safety precautions to reduce the risk of fire, 

electric shock and injury to persons, including the 

following:

 

x

The UBRC13 camera is NOT weatherproof. It is an indoor 
camera  

 

x

To avoid any risk of electric shock from lightning, avoid 
handling any electronic devices (except battery-powered 
ones) during an electrical storm. 

 

x

Use only the power cord indicated in this manual.

 

x

Never tug or pull on any power cord; be sure to leave 
some slack in the cord when placing your equipment, and 
always use the plug to unplug cord from the wall outlet.

 

x

Never leave power cords where they can become 
crushed, cut, or frayed; when running power cords, avoid 
letting them rub against any sharp edges or lie across any 
high traffic areas where people might trip over them. 

 

x

Do not use the device if the adapter cords or plugs have 
been damaged, the monitor has been exposed to liquids, 
or the monitor/camera has been dropped or is damaged.

WARNING TO PARENTS AND  

OTHER USERS

Failure to follow these warnings and the assembly 

instructions could result in serious injury or 

death. This product is not designed or intended 

for use as a medical monitor, nor should this 

product be used as a substitution for medical or 

Summary of Contents for UBRC13













Reviews: