467.8500
How Squelch Works
Setting the Squelch
Think of “SQUELCH” as a gate. If the gate is too low (squelch
too low), everything (all noise as well as signals) gets through.
If the gate is set too high (squelch too high), nothing gets
through.
If the gate is set just right (squelch set properly), just the
desired signals get through.
1. To set the squelch, press
to stop
scanning.
2. Turn
fully counterclockwise until hiss heard.
This lowers the “squelch gate,” allowing all signals and
noise to get through.
3. Turn
fully clockwise just until hiss stops.
This raises the “squelch gate,” allowing only strong signals
to get through.
HOLD/RESUME
SQL
SQL
