Uniden UBC355XLT Owner'S Manual Download Page 7

Page: 7 / 68

The country mode can be switched between Australia and New
Zealand as follows:

•

Turn on the power while pressing down the

Hold

key. The

display will show the current setting;

AUS

for Australian mode

for New Zealand mode.

•

Press

to change the setting.

•

Press

Prog

to store the country mode. The scanner displays

the models name and starts in the last mode.

The country mode is remembered for the next power on.

FEATURE SUMMARY

The UBC355XLT is a compact mobile/base scanner and one of the
most user-friendly communication products available today. The
UBC355XLT features include:

•

Turbo search – Allows your UBC355XLT to search 180 steps per
second. (5 kHz step band only)

•

Nine Banks – 8 preprogrammed Service banks and one
standard, programmable Private bank. These banks include:

Summary of Contents for UBC355XLT





































































Search results

Summary of Contents for UBC355XLT

Reviews:

Related manuals for UBC355XLT

Brands by name

Popular brands

Uniden UBC355XLT, Owner'S Manual

Search results

Summary of Contents for UBC355XLT

Reviews:

Related manuals for UBC355XLT

Brands by name

Popular brands