39
SETTING CHANNEL DELAY
This setting controls how many seconds the scanner waits after
a transmission ends before resuming scanning. If you select a
minus delay time, the scanner stops on the transmission for the
setting time, then automatically resumes scanning. (Default = 2
seconds)
1.
To select a channel, press
Hold
then enter the channel
number.
2. Press
Pgm/E
to enter the
Channel
menu. (You can also
press
Hold
and scroll to the channel; press
Func
then
Pgm/E
.)
3. Scroll
to
Set Delay
and press
Pgm/E
.
4. Turn
SCROLL CONTROL
to select the delay time from the
following options:
• -10 sec - resumes after 10 seconds.
• -5 sec - resumes after 5 seconds.
• 0 sec - resumes immediately.
• 1 sec - waits 1 second for a reply then resumes.
• 2 sec - waits 2 seconds for a reply then resumes.
• 3 sec - waits 3 seconds for a reply then resumes.
• 4 sec - waits 4 seconds for a reply then resumes.
• 5 sec - waits 5 seconds for a reply then resumes.
5. Press
Pgm/E
to save and return to the
Channel
menu.
UB374ZV̲UBC125XLT̲130329.indd 39
UB374ZV̲UBC125XLT̲130329.indd 39
2013/03/29 10:34:54
2013/03/29 10:34:54