manualshive.com logo in svg

Uniden TRU9480 Series, Owner'S Manual, Page: 69 / 88

Share
Download
Uniden TRU9480 Series Owner'S Manual Download Page 69

68

Battery.Replacement.and.Handling.

With.average.use,.your.phone’s.battery.should.last.approximately.one.year..To.order.replacement.batteries,.please.

contact.Uniden’s.Parts.Department..The.contact.information.is.listed.on.the.back.cover.page..

Cleaning.the.Battery.Contacts

To.maintain.a.good.charge,.clean.the.charging.contacts.on.the.handset.

once.a.month..Dampen.a.cloth.with.plain.water..Gently.rub.the.damp.cloth.

over.the.charging.contacts.until.all.visible.dirt.is.removed..Dry.the.contacts.

thoroughly.before.returning.the.handset.to.the.charging.cradle.

Caution:

.Do.not.use.paint.thinner,.alcohol,.or.other.chemical.products..Do-

ing so may discolor the surface of the telephone and damage the finish. 

Warning

To avoid the risk of personal injury or property damage from fire or electrical shock, use only Uniden AD-830 (9V 

400mA).and.AD-0005.AC.adapters.and.Uniden.BT-446.battery.pack.with.your.phone..

Caution:.

Use only the specified Uniden battery pack BT-446. 

Do.not.remove.the.batteries.from.the.handset.to.charge.them..

Never throw the battery into a fire, disassemble, or heat them. 

Do.not.remove.or.damage.the.battery.casing..

A.replacement.Uniden.adapter.or.battery.may.be.purchased.by.calling.Uniden’s.Parts.department..See.back.

cover.page.for.contact.information.

•

•

•

•

•

Summary of Contents for TRU9480 Series

























































































Reviews:

No comments