P H O N E B O O K [ 27 ]
PHONEBOOK
• When the memory is
full, you will hear a
beep and “
Memory
Full
” appears. You
cannot store names
and numbers.
• The pause key counts
as one digit. Pressing
redial/p
more than
once increases the
length of pause
between numbers.
2) Press
select/ch
, “
Store/Edit Name
” appears.
3) Store the name (up to 16 characters) by using the number keypad.
• See the “Steps for entering names and special characters” (see page 28).
• Use
call id/
and
/RocketDial/
to move the cursor to the desired location.
• Use
xfer/del
to delete characters as needed.
• Press and hold
xfer/del
to delete all the characters.
If a name is not required, go to step 4.
4) Press
select/ch
to store the name,
“
Store/Edit No.
” appears.
5) Press the number keypad to enter the phone number (up to 20 digits),
press
select/ch
to store the number.
6) “
Distinctive Ring
” appears. Press
+
or
-
to move
the pointer to one of the Distinctive Ring options, then
press
select/ch
.
7) “
Speed Dial
” appears. Press
+
or
-
to move the pointer to
select the Speed dial location (10 locations: SPD1-SPD0).
8) Press
select/ch
. You will hear a confirmation tone and
“
Done!
” appears on the display.
If you choose not to store a “
Distinctive Ring
”, simply select
the “
No Selectn
” option.
If you choose not to store the name/number as a Speed Dial, simply
select the “
No Selectn
” option.
• If you select a Speed
dial location a number is
already stored, the new
number will replace the
old number, and the old
number will be stored as
a phonebook location.
