Uniden TRU3466, Owner'S Manual

Page: 16 / 56

1) When the phone is in the standby mode,
press and hold cid/hold until the Caller
ID setting screen appears.
2) Press
*
/
t t
/tone or # /
s
to select ”
Line1
” or ”
Line2
” .
3) Press
▲
/up/intcm to select
”
Area Code
” .
4) Press select/channel .
5) Use the dial buttons ( 0 to 9 ) to
enter the 3-digit area code.
6) Press select/channel . A tone sounds and the displayed area
code is entered.
7) Press cid/hold to complete the setting. Or return the handset
to the base unit. The handset returns to standby mode.
[ 12 ] G E T T I N G S TA R T E D [ 12 ]
note
If you enter your 3-digit area code number in the ”
Area Code
” option, your
local area code does not appear in the Caller ID messages. Do not program this
option, if your calling area requires 10-digit dialing. When reviewing Caller ID
messages, you will see only the local seven digit number. For calls received from
outside your local area code, you will see a full 10-digit number.
Entering Your Area Code
If your calling area
requires 10-digit dialing,
do not program this
option.
When the area code has already been stored in memory, the stored area code will be displayed.
To change it, use the
delete/volume and number keypad to enter
the new area code. Then press select/channel . To complete the
setting, press cid/hold or return the handset to the base unit.
note
TRU3466 ENG 8/8/01 12:18 PM Page 12