background image

[ 3 ]   W E L C O M E / F E A T U R E S / T E R M I N O L O G Y

w w w . u n i d e n . c o m

This series features 

AutoTalk

 and 

AutoStandby

. AutoTalk allows you to answer a call by just removing 

the handset from the cradle so you don't have to waste time pushing buttons. AutoStandby allows you to 
hang up by simply returning the handset to the cradle.

To protect you against mis-billed calls that might result from your phone being activated by other 
equipment, this series has 

Random Code

 digital security, which automatically selects one of more than 

10,000,000 digital security codes for the handset and base.

Digital Spread Spectrum Technology uses a wider frequency band than standard digital transmissions. The 
result is a more secure conversation with the clarity of digital sound, extended range, and minimal 
interference from other cordless phones.

IntegriSound

 Built in sound quality which provides life-like conversations.

With 

DirectLink

 mode, you can use 2 or more handsets as radio transceivers (walkie-talkies). 

Be sure to visit our web site: www.uniden.com
Uniden

®

 is a registered trademark of Uniden America Corporation.

AutoTalk, AutoStandby, DirectLink, IntegriSound and Random Code are trademarks of Uniden America.

Terminology

Standby Mode

 - The handset is not in use, and 

talk/flash

 or 

speaker

 has not been pressed. No dial tone is 

present.

Talk Mode

 -

The handset is not in the cradle, and 

talk/flash

 or 

speaker

 has been pressed, enabling a dial tone. 

Ta l k

 appears on the display.

WE

L
C
O
M
E
/

FE

A
T
URES/

Summary of Contents for TRU 8065 Series













































































Reviews: