Uniden T R U 346, Owner'S Manual, Page: 11 / 52

G E T T I N G S TA R T E D [ 9 ]
CCh haarrg gee tth hee b baatttteerryy p paacckk ffo orr aatt lleeaasstt 1 15 5--2 20 0 h ho ou urrss b beeffo orree yyo ou u ssttaarrtt u ussiin ng g
yyo ou urr p ph ho on nee..
1 Press in on the batter y cover release and slide the
cover down until it comes of f.
2 Connect the batter y pack connector with the correct
polarity (black and red wires), then inser t the
batter y pack into the batter y compar tment.
3 Securely close the batter y compar tment cover by
sliding it up until it snaps into place.
4 Place the handset on the base as shown.
5 Make sure that the ssttaattu uss LED lights. If the LED
doesn´t light, check to see that the AC adapter is
plugged in and that the handset makes good contact
with the base charging contacts.
Use only the Uniden Batter y (BT-800) supplied
with your phone. Replacement batteries are also
available through the Uniden Par ts Depar tment.
(see page 5)
GETTING ST
ARTED
Preparing the Battery Pack
The plastic connectors
will fit together only one
way. Make sure the
battery´s connector is
properly aligned.
1
2
3
4, 5
ssttaattu uss LED
TRU346 CANADA 7/6/01 3:59 PM Page 9