background image

2

©2000 RELM Wireless Corporation
All Rights Reserved

Safety Information

Through the provisions of the Occupational Safety and Health Ac (OSHA) of 1970, the United
States Department of Labor has established an electromagnetic safety standard which applies
to the use of two-way radio equipment. The proper use of this transceiver will result in
exposure below the OSHA limit.

The following precautions shall be observed:

DO NOT

 operate the transceiver of any radio equipment with the antenna touching, or

close to, the eyes, faces, or exposed body parts.

DO NOT

 operate the transmitter of any radio equipment unless all the Radio Fre-

quency (RF) connectors are secure and any open connectors are properly terminated.

DO NOT

 operate the transmitter of any radio equipment near electrical blasting caps

or in an explosive environment.

DO NOT

 let children operate any transmitter-equipped radio equipment.

• Have your radio equipment installed and service by a qualified technician

Rechargeable Nickel-Cadmium Battery Pack Warning

This radio contains a Rechargeable Nickel-Cadmium Battery Pack. Cadmium is a
chemical known to the State of California to cause cancer. The Rechargeable Nickel-
Cadmium Battery Pack contained in this radio may explode if disposed of in a fire.

DO NOT short circuit this Rechargeable Nickel-Cadmium Battery Pack.

DO NOT charge the Rechargeable Nickel-Cadmium Battery Pack except with the
recommended chargers .

Rechargeable Nickel-Cadmium Battery Packs Must Be Recycled or Disposed of
Properly!

Residents of Minnesota should contact 1-800-225-PRBA for information concerning
reclamation and disposal of Rechargeable Nickel-Cadmium Battery Packs. Residents
outside of Minnesota should contact their local authorities for information concerning
reclamation and disposal of Rechargeable Nickel-Cadmium Battery Packs.

Caution: 

RELM does not represent this radio to be waterproof Do not use the radio in damp

or high-moisture environments.

27

Two year Limited Warranty

WARRANTOR: RELM Wireless Corporation (“RELM” or
“Warrantor”).

ELEMENTS OF WARRANTY:

 RELM Wireless Corporation warrants to

the purchaser that all new Radio equipment of RELM’s manufacture shall be
free of defects in material and workmanship. Equipment and accessory items
not manufactured by RELM carry the standard warranty of the manufacturer
thereof.

WARRANTY DURATION:

 The warranty period for all parts is two (2)

years. The warranty period shall commence upon installation of the
equipment or two (2) months from the date of shipment from the factory,
whichever comes first.

The warranty shall terminate and be of no further effect two (2) years from
its origin or at the time the Product is (a) damaged or not maintained as
reasonable, (b) modified, (c) improperly installed, (d) is repaired by someone
other than Warrantor or Authorized Warranty Repair Station for a defect or
malfunction covered by this Warranty, or (e) used in a manner or purpose for
which the Product was not intended or in an environmental condition for
which the Product was not intended.

STATEMENT OF REMEDY:

 Where permitted by law, this Warranty is in

lieu of all other Warranties expressed or implied, including warranties of
merchantability or fitness for a particular purpose, and no representative or
person is authorized to assume for us any other liability. This warranty shall
not extend to incidental or consequential damages arising from operation of
Product(s) which are subject of this Warranty. Some States do not allow
limitation of implied warranties so the above limitations may not be
applicable. You may have rights as defined by individual State law.

WARRANTY REGISTRATION CARD:

 In order to facilitate the service

under this Warranty, Purchaser should return the Warranty Registration Card
to Warrantor. However, return of the Warranty Registration Card is not a
precondition of this Warranty. This Warranty will be observed by the
Warrantor whether or not the Warranty Registration Card is returned, on the
condition that other evidence, satisfactory to Uniden, of the date of the
original installation or purchase is provided to the Warrantor.

PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY:

To obtain warranty service, the Customer must return the radio properly
packed, freight prepaid, to Warrantor or any Authorized Warrantor Repair
Station. It will be returned freight prepaid.

Summary of Contents for SPU554KTS















Reviews: