-
9
-
INSTALL AND TURN ON R1
You can mount the R1 on the windshield (bracket included) or on the dashboard
(hook and loop tape included).
INSTALL
Windshield
When you mount the R1 on the windshield, mount it in the middle of the windshield
between the driver and passenger. Be sure there are no obstructions and that there
is a clear view through the back window.
1. Attach the rubber suction cups to the bracket and push the cups firmly onto
the windshield.
2. Slide the unit onto the bracket until it clicks into place.
3. Plug the power cord into the R1 and plug the cigarette lighter adapter into the
vehicle’s cigarette lighter.
4. The R1 automatically turns on and runs through a self test cycle.
Release the
R1
from the bracket by pressing the Eject key on top of the detector.
Dashboard
The same types of mounting requirements for the windshield apply for mounting
the unit on the dashboard.
Do not put the tape over vents. Always leave vents uncovered.
1. Attach the unit to the dashboard using the hook and loop fastener tape.
2. Plug the power cord into the R1 and plug the cigarette lighter adapter into the
vehicle’s cigarette lighter.
3. The R1 automatically turns on and runs through a self test cycle.
Pull the unit from the dashboard, separating the hook and loop tape.
TURN ON
1. Inert the power cord’s RJ11 connector into the R1’s power jack.
2. Insert the power cord’s cigarette lighter adapter into the vehicle’s cigarette
lighter port.
3. The R1 automatically turns on and runs through a systems check.