22
23
2 . Select
Save
, then click
Exit
to return to the Recording Setting screen .
3 . Go to
Channel Setting/Channel Parameter/Motion
tab . For each channel:
• Enable Motion Detection
• Select
Full Screen
. A red grid displays . This grid shows the areas that WILL trigger motion
detection. If you only want a specific area of the camera's view to trigger motion detection,
select
Clear all
, then click and drag the curser over the area you want to trigger recording .
This creates a specific red grid. Everything outside of the red grid will NOT trigger motion
detection .
4 . Click
Save
.
5 .
If you want to copy that channel's settings to another channel, Click
Copy
to at the bottom of
the screen . The
Copy to
popup screen displays
6 .
Uncheck the options you don't want to copy. Select
All
(copy to all channels) or select specific
channels . Click
Confirm
and the
Motion tab
screen displays again .
SET UP ALARM INPUTS/OUTPUTS
Alarm Inputs
1 . Go to
System Setting/Alarm ManagementAlarm Input,
top tab .
2 .
Complete the fields. Click
Save
if your are finished. Click
Copy To
to copy the setting to other
channels . The
Copy To
screen displays .
3 .
Uncheck the options you don't want to copy. Click
All
(copy to all channels) or select specific
channels . Click
OK
and the Alarm Input tab screen displays again .
Alarm Outputs
1 . Go to
System Setting/Alarm Management/Alarm Output
top tab .
2 .
Complete the fields. Click
Save
if your are finished. Click
Copy To
to copy the settings to other
channels, and then click
Save
when finished.
SET UP EMAIL NOTIFICATION
1 . Go to
System Setting/Network Setting/Email Setting
top tab . The
Email setting
screen displays .
ProSeries NVR Installation Guide Only 03162018.indd 22-23
3/26/2018 10:32:43 AM
