18
19
Network Setting
Uniden ProSeries QR Codes
2 . Check the
Next time no longer display
box in lower left corner . This series of screens will not
display for further startups .
3 . Click
Finish
.
SYSTEM SETTING
TIME SETUP
Select the
System Setting
tab . The
Time Setting
side tab displays as the default screen .
1 . Select the
Device Time
top tab and manuallty set the device clock .
•
Device Time:
Verify and adjust the date and time if needed (Default - Central) .
•
Time zone:
Verify and adjust time zone if needed .
•
Enable DST:
Verify Daylight Saving Time setting; verify start and end dates .
•
Enable NTP Time Sync:
Recorder can be synchronized to a standard NTP time source such as
a server, a network time clock, or an internet time source (default) .
If Server Address is a name and not an IP address, make sure the DNS1 and DNS2
fields in System Setting/Network Parameter are correct.
2 . Click
icon to save the settings .
NEW USER/PASSWORD SETUP
1 . Go to
System Setting
and select the
User Management
side tab . A list of users displays .
INITIAL SYSTEM SETUP
LOGIN SYSTEM
1 . Click the
icon; a drop-down menu displays . Options are:
•
Login:
Logs the current user into the system . (After login, this selection changes to
Logout
.)
•
Guide:
Configure the system.
•
Reboot:
Restart the device .
•
Shutdown:
Closes ProSeries operations and powers down the device .
2 . Click
Login
; the Login interface displays .
Dropdown Menu
User Login
3 .
Enter user name (default user name: admin). Leave password field blank if using default user
name .
INITIAL SETUP
1 . Click the
icon again and select
Guide
. Go through these screens to configure the system:
•
Language setting:
Select user language (Default: ENGLISH) as shown in figure 5.3. Click
Next
.
•
Display setting:
Select the screen resolution (Default: 1920x1080-P60) . Click
Next
.
•
Network setting:
Check the dropdown list for
Network Card
. If you only have one LAN port, do not
set a static IP address and leave DHCP enabled . If you have more than 1 LAN port, disable
DHCP and write down the IP address, mask, and gateway that the DHCP server/router assigns
as shown in figure 5.5. Click Next.
•
Uniden ProSeries:
QR codes display to download the Uniden ProSeries a . Apple QR code
downloads app for iOS version and Android QR code downloads the Android version as shown in
figure 5.6.
Language Setting
Display Setting
ProSeries NVR Installation Guide Only 03162018.indd 18-19
3/26/2018 10:32:38 AM
