E-41
Uniden MHS335BT Radio Owner’s Manual
DATA
RMC
GLL
GGA
GSV GSA
Speed
O
X
X
X
X
Course
O
X
X
X
X
Date
O
X
X
X
X
X = Data Not Provided
O = Data Provided
Chartplotter Connection
If you have difficulty getting your chartplotter to receive data from your radio, check the
chartplotter's configuration. It should be set to the following parameters:
Baud rate
4800 bps
Data bits
8
Parity
None
Stop bits
1
Data amplitude
Over 3.0 V
Drive capability
Over 10 mA
NMEA Output
When the radio receives a DSC call (Distress, Position Reply, or Position Send), it outputs a
DSC/DSE sentences from the NMEA output port in the following formats:
x
$CDDSC,12,3081234000,,07,00,0354013946,0657,,,S,E*6D
x
$CDDSE,1,1,A,3081234000,00,60875646*13
ADDITIONAL FEATURES
RENAMING CHANNELS
If you discover that a marine radio channel has a different common name in your local area,
you can change the name of that channel to make it easier for you to use (see the channel
lists beginning on page E-45 for the default channel names). To rename a channel, follow
the steps below:
1. Press
MENU
and select
RADIO SETUP
/Channel Name.
The screen displays the list
of channels with their names.
2. Press
▲
or
▼
to select the channel you want to change and then select
RENAME
.
Connect to Chartplotter