Uniden MHS335BT Owner'S Manual Download Page 15

Page: 15 / 64

E-11

Uniden MHS335BT Radio Owner’s Manual

MENU ITEM

DESCRIPTION

SOS Strobe

The LED on the front of the radio acts as a strobe light. Set water

activation and timeout duration here.

Inactivity Timer

Set how long the radio remains inactive before it times out.

Key Assignment

Reassign soft key functions to different keys.

Reset Radio to
Factory

Return your radio to the factory defaults. You will lose all
programming.

RADIO SETUP

Menu

Use the

RADIO SETUP

menu to fine tune how the radio will operate. For example, you can

rename channels, set channel modes, etc.

MENU ITEM

DESCRIPTION

Channel Mode

Set to USA, CAN (Canada), or INTL (International). (See page
E-27.)

Weather Radio

Turn weather alerts on or off (see page E-27) and enter S.A.M.E

codes (see page E-27).

Dual/Tri Watch

Turn Dual or Triple Watch on and off (see page E-19).

Priority Channel

Select a channel to be the priority channel when scanning. (See
page E-17.)

2nd Priority
Channel

Select a channel to be the secondary priority channel when
scanning. (See page E-17.)

Scan Type

Select a scanning type: Priority Scan or Memory Scan (see page
E-17.)

Scan Pause
Timer

Set how long scanning will pause when the

SCAN

soft key is

pressed.

Channel Name

Rename a channel (see page E-41).

Noise Cancel

Select noise cancelling for received or transmitted signals.

Receive Audio
Pitch

Set audio pitch.

- Normal
- Mid Range
- Highs & Lows Boost
- Lows Boost
- Highs Boost

Summary of Contents for MHS335BT

































































Search results

Summary of Contents for MHS335BT

Reviews:

Related manuals for MHS335BT

Brands by name

Popular brands

Uniden MHS335BT, Owner'S Manual

Search results

Summary of Contents for MHS335BT

Reviews:

Related manuals for MHS335BT

Brands by name

Popular brands