Uniden MHS135DSC Owner'S Manual Download Page 34

Page: 34 / 42

E-30

Uniden MHS135DSC Radio Owner’s Manual

COMMOn qUestiOns

Problem

Things to Try

The radio won’t turn on.

Charge the radio.

The power LED on the charger

doesn’t turn on.

Don’t use the charger when the ambient temperature is below 0° C (32°

F) or above 45° C (113° F).

Make sure the charging contacts on the radio and charger are clean.

Replace the battery.

The radio won’t transmit.

Make sure you are not in Weather or Scan mode.

Make sure you are not trying to transmit on a receive-only channel or

transmit at the wrong power level for this channel (see the channel lists

starting on page E-31.

Check the battery power level; if it’s low, charge the battery before trying

to transmit.

Make sure the duration of each transmission is less than 5 minutes.

I can’t hear anything from the

speaker.

Adjust the squelch level; it is probably too high.

Noise comes out of the

speaker all the time

Adjust the squelch level; it is probably too low.

I can transmit, but no one can

hear me.

Check your UIC channel settings: does the area you are in use different

channel assignments?

I’m not getting hazard alerts.

Make sure Weather Alert Watch is turned on.

The display flashes, and I don’t

know why.

The channel number on the display will flash if the radio is in a watch mode

or in scan mode. Try turning off scanning, Weather Alert Watch, Triple Watch,

or Dual Watch beginning on page E-7.

Where can I find my radio’s

serial number?

The serial number is on a plate inside the battery compartment.

sPeCiFiCatiOns

General

Channels

All US/International/Canada marine channels
10 Weather channels

Freq. Control

PLL

Freq. Tol.

Transmit: 1.5 PPM (at 77°F/25°C)
Receive: 1.5 PPM (at 77°F/25°C)

Oper. Temp.

-4°F (-20°C) to +122°F(+50°C)

Antenna

Flexible Whip

Microphone

Built-in Electret type

Display

Liquid Crystal Display

Speaker

8Ω 1.0 W

Power Source

Rechargeable Lithium Ion Battery

7.4V 1040 mAh

Summary of Contents for MHS135DSC











































Search results

Summary of Contents for MHS135DSC

Reviews:

Related manuals for MHS135DSC

Brands by name

Popular brands

Uniden MHS135DSC, Owner'S Manual

Search results

Summary of Contents for MHS135DSC

Reviews:

Related manuals for MHS135DSC

Brands by name

Popular brands