Uniden MHS135DSC Owner'S Manual Download Page 16

Page: 16 / 42

E-12

Uniden MHS135DSC Radio Owner’s Manual

entering the User MMsi

When you power up your radio for the first time, it displays

MMSI Not Entered

and then

displays a marine mode screen. User MMSI numbers are unique and cannot be entered

more than once. See page E-15 for general information about MMSI numbers and how to

get your specific User MMSI number and enter it.

setting it UP

Even though you can change your radio’s settings at any time, you will probably want

to establish initial settings when you have turned it on for the first time. You will adjust

some of these settings on an as-needed basis, but some settings might only be set

once and not need adjustment at all.

Changing the Volume

To change the speaker volume, press

VOL-SQ

to enter Volume Setting mode.The

VOL

Level

Adjustment

bar displays on the LCD. Press

CHANNEL UP

CHANNEL DOWN

increase or decrease the volume levels (0 - 15).

Setting the Squelch Level

The squelch feature reduces static on the speaker by filtering out any background

channel noise. At the lowest squelch level, the speaker plays all signals, including any

channel noise. Setting the squelch level higher filters out noise and lets only actual radio

transmissions through.
While listening to a channel, press and hold

VOL-SQ

to enter Squelch Setting mode.

The

SQUELCH Level

adjustment bar displays on the LCD. Press

CHANNEL UP

CHANNEL DOWN

to increase or decrease the squelch levels (0 - 15).

note: setting the squelch level too high may prevent you from hearing weaker
transmissions. if you are having difficulty hearing a transmission, try setting the squelch
level lower.

Setting the UIC Channel Mode (USA/CAN/INT)

You can select marine channels for the USA, Canada, or International waters.

1. Press

MENU/CALL

. The

Normal

menu displays.

2. Select

Setup

and press

ENTER-H/M/L

.The

Setup

menu displays.

3. Select

USA/CAN/INT

and press

ENTER-H/M/L

. The

UIC Channels

screen displays.

4. Select the mode you want and press

ENTER-H/M/L

Setting Key Lock

You can lock and unlock the keypad through the

Setup

menu. You can also unlock it by

pressing and holding

MENU/CALL

for 2 seconds.

Setting WX Alert Mode

From the

SETUP

menu, select

WX Alert

mode to turn this mode ON for the radio to

monitor weather channels and alert you to any broadcast weather alerts or notifications.

Setting FIPS Codes

FIPS codes identify geographic areas in the United States. FIPS codes allow you to

receive only the SAME alert occurring in a specific area. You can enter a maximum of

Summary of Contents for MHS135DSC











































Search results

Summary of Contents for MHS135DSC

Reviews:

Related manuals for MHS135DSC

Brands by name

Popular brands

Uniden MHS135DSC, Owner'S Manual

Search results

Summary of Contents for MHS135DSC

Reviews:

Related manuals for MHS135DSC

Brands by name

Popular brands