background image

- 9 -

MENU ITEM

WHAT IT DOES

SETTINGS

Ka Band

Turn off to have the detector ignore Ka Band 

frequencies.

On

Off

Laser 

Turn off to have the detector ignore lasers.

POP Mode

Detects POP transmissions (very brief transmissions, too 

fast for some detectors to hear).

On

Off

K Filter

Filters noise from the K band to prevent false detections. On

Off

Scan

If Scan is turned on, a dot displays and moves back and 

forth on the screen to indicate scanning status..

On

Off

Display

Lets you set the following:

 

x

Speed

mph, km/h

 

x

Compass (8 points)

NW, W, etc

 

x

Voltage

V

 

x

Altitude

m, ft.

 

x

Off

Speed Unit

Sets the speed measurement type.

Miles per Hour (mph)

Kilometers per hour (KPH)

Auto Mute

Auto Mute reduces alarm level to 1 after 3 seconds 

and returns to normal operation (Auto Mute = OFF) 

10 seconds after the alert ends. If the same or another 

alarm sounds within the 10 second period, Auto Mute 

remains at level 1. The unit returns to normal operation 

(Auto Mute = OFF) if a different band is detected during 

Auto Mute = ON mode.

On

Off

Backlight

Turns the backlight on and off.

Press and hold MUTE/DIM to select a brightness level.

On

Off

Quiet Ride

Mutes laser and radar alarms when you drive under the 

speed limit you set here.

5 to 50 in 5 mph (10 to 80 in 10 

kp/h) intervals

Limit Speed

Sounds an alarm when the vehicle reaches a specific 

speed.

50 to 100 in 5 mph (80 to 160 in 10 

kp/h) intervals

GMT

Sets time zone according to Greenwich Mean Time 

(GMT).

Most common time zone settings 

for North America are: 

 

x

GMT-05:00 - Eastern Standard

 

x

GMT-06:00 - Central Standard

 

x

GMT-07:00 - Mountain Standard

 

x

GMT-08:00 - Pacific Standard

 

x

GMT-09:00 - Yukon Standard

 

x

GMT-10:00 - Alaska-Hawaii 

Standard

DST

Daylight Saving Time

On

Off

BAT Warning

Issues a warning if the vehicle battery power drops 

below 11V.

On

Off

BAT Saver

Turns off power to the LRD950 if the speed stays at 0 or 

if the GPS is not connected for more than an hour.

On

Off

Selt Test

Runs a self diagnostic test on the unit to check for faults. On

Off

Factory Reset Resets all settings except GMT to the factory defaults.

There is no confirmation request for reset.

NA

Summary of Contents for LRD950















Reviews: