- 11 -
HIGHWAY VS CITY MODE
Radar detectors operate with various sensitivity levels. These levels determine the types of signals and signal
ranges (bands) detected. Highway mode is the most sensitive level while City mode is the least sensitive. If the X
band is left on in City mode, a radar detector can pick up many X band signals (such as garage door openers) that
generate false alerts. The LRD950 turns off the X band for City mode. When you are on the highway, there is less
chance of picking up X band false alerts, so the LRD keeps the X band on.
Press and hold both
VOL +
and
VOL –
for at least 1 second to alternate between HIGHWAY and CITY mode.
POP MODE
In POP mode, the LRD950 can detect short burst from radars that are too fast for many other detectors to catch.
You can turn POP mode on and off.
SCAN DISPLAY
A small dot on the screen indicates that the unit is scanning for
signals
. This dot travels back and forth in the
middle of the screen. You can turn this display on and off in the Menu system.
Scan Display
- - -
mph
C-NoX
.
Elements on the screen vary according to what you turn on
and off in the Menu system
ALARM PRIORITIES
x
Speed Camera / Red Light Camera / User Mark Detect Alarm, POI Limit Speed Alarm
x
Laser signal
x
X, K, Ka Band signal
x
User Limit Speed Alarm
x
Vehicle
Low Battery Voltage Warning, Vehicle Battery Saver Alarm
MUTE MEMORY
Use Mute Memory to mute known areas of false positive alarms (such as department store automatic doors).
The LRD950 remembers where you muted the audio (GPS location) and the frequency you muted. It will
automatically mute when you travel to that location and the saved frequency is detected; however, if a different
frequency is detected, the LRD950 alerts to that different frequency.
When you press
MUTE/DIM
to mute audio for a specific location,
Mute On
displays. While
Mute On
displays,
press
MUTE/DIM
again to save that GPS location to memory.
Mute Memory
displays on the screen.
LRD950 stores up to 100 Mute Memory points.
To delete Mute Memory points, press
MUTE/DIM
while
Mute Memory
displays. The LRD950 displays a delete
confirmation message; press
MUTE/DIM
again to confirm. You can also delete Mute Memory points from
Menus/Delete All Mute?
MAINTENANCE
MAINTAINING THE EQUIPMENT
The LRD950 requires very little physical maintenance. Wipe it with a soft cloth to keep dust from accumulating.
Check the power cord connections to keep them clean and free of corrosion.
