13
Vehicle Recorder
UNIDEN iGO CAM 90/90R
Recording
Mirror Rear
Image
Enable to display in mirrored image for the
rear and internal camera.
Disable to display in real image for rear and
internal camera.
Recordings are recorded in real image.
Motion
Detection
Enable this setting to allow the unit to record
only when only the front camera detects
movement.
WDR
Enable/disable the Wide Dynamic Range
(WDR) feature to improves the overall
exposure throughout your entire image.
Anti-Flicker
Change depending on the electrical power
frequency in your area (Default setting is
50Hz and you may not have to change this
setting).
G Sensor
This functions helps protect/lock video files
in case of a sudden impact/collision. You can
change the sensitivity level of the G-sensor.
Exposure
Set the brightness sensitivity for better effect
in different lighting condition
Playback
Normal
Recording
Normal video recordings are save in this
folder.
Event
Recording
Locked/event recordings are save in this
folder.
Photo
All the snapshots are save in this folder.
Return to the folder selection and press and hold
M
to exit.
Parking Mode
Parking mode only works with the optional
Hard Wire Kit (HWK-2). The unit must have
sufficient external power supplied in order to
record in parking mode.
Parking Guard:
This mode turns on the unit if it detects
impact and will record for 60 seconds.
Parking Monitor:
Once the ACC current is cut off, the unit
will start time-lapse recording (1 fps and
playback in 30fps).
