background image

17

UNIDEN iGO CAM 755

Vehicle Recorder

Special Features

The iGO CAM 755 alerts the user when there is a fixed Speed/Red Light/Red 

Light-Speed or Average Speed Camera. 

For this feature to work, please ensure that the Menu option, Traffic Camera 

Alert, in the Record mode is turned on. 

When the vehicle is close to any of the fixed cameras, the LCD will display 

the camera alert icon along with specific information. This information will 

include the distance from the vehicle to the camera, the specified speed limit 

and the current speed of the vehicle. The display is accompanied by a voice 

alert.

Traffic Camera Alerts

GPS

The iGO CAM 755 has a GPS antenna, allowing your videos to be geo-

tagged. Please ensure that the bracket is fitted on the unit and the GPS 

antenna is plugged into the GPS port for the unit  to be able to detect the 

GPS signal. You can view the recorded videos on the iGO CAM Player and 

trace them on a map. 

The cameras alerts will be disabled when the unit loses the GPS signal.

ADAS Calibration

ADAS includes the following 4 functions: LDWS - Lane Departure Warning 

System, FCWS - Front Collision Warning System, FCMD - Front Vehicle 

Moving Detection and LLWS - Low Light Warning System.

1. First, ensure that the iGO CAM 755 is mounted and powered on and the 

vehicle is safely parked.

2. Next, ensure that the Menu option (in the Record Mode) ADAS Detect is 

turned ON.

3. After that select the Menu option, ADAS Calibration, (Record Mode). You 

will see 2 sensor lines (Purple and Red) displayed on the screen. 

4. Press the MODE button to select either of the sensor lines. Then use the 

Left and Right keys to position the lines to encompass only the area of 
the display where road markings can be seen. Please refer to the image 
on the next page.

Ensure to follow the steps listed and read the notes below to get the most out 

of this feature.

The ADAS detect will not function when the traffic camera alert is turned on 

or when the live view is turned on to Speed Display. It also won’t work under 

the following resolutions; 2304x1296 30P and HDR 1920x1080 30P.

Summary of Contents for iGO CAM 755

























Reviews: