Uniden iGO CAM 345, Owner'S Manual

Page: 7 / 20

7
UNIDEN iGO CAM 345 Vehicle Recorder
How Do I Put It in My Car?
Attaching the Windshield Mount
1. Screw in the windshield mount into the bracket hole provided on the top of
the unit.
2. Tighten the nut to locks in position.
3. Remove the plastic protective film on the suction cup. Press the suction
cup flat against the windshield.
4. Push the suction lock up, until it snaps into place and tighten the locking
collar to secure.
5. Gently pull on the mount to make sure it is secure.
6. Mount the rear/reverse camera as you desire. The two included screws will
hold the camera in place.
7. Connect the AV cable from the rear camera to the front camera.
8. Arrange and hide the cables to avoid obstruction for the driver’s view.
9. Adjust the viewing angle of the camera by loosening the screw of the
bracket and fasten it back to secure the viewing angle. We recommend the
camera should point slightly downwards ~10° below eye level.
NOTE
Suction cups will not stick well on a curved/textured or wet
surface. Ensure the suction cups surface is clean.
NOTE
Remove the suction cup protective film or the mount might not
stick well.