8
9
NETWORK SETUP
OVERVIEW
There are two methods of connecting the Guardian App Cam 26 camera to
your mobile device. One method is wireless and the other method has the
camera connected directly to the router using the provided Ethernet cable.
The add camera procedures themselves are identical. In the setup
procedures that follow, the wired connection instructions are noted where
applicable.
PREREqUISITES
•
Your router must support WPA/WPA2 security and it must be turned on.
•
You must have an available WiFi-enabled mobile device (Android or iOS
smartphone/tablet).
•
The Guardian App Cam 26 and your mobile device must connect to the
same WiFi router for setup.
SET UP CAMERA AND SMARTPHONE/TABLET
1. Download the Guardian App (search for - Uniden® AppCam™) from the
Apple App store (iOS) or Play Store (Android) on to your device.
2. Connect the antenna to the camera.
3. Wireless Setup
- Connect the camera to power. After about 45
seconds, the camera goes through a Pan/Tilt cycle and the green LED
begins to flash (3-flash/pause pattern), indicating that the camera is in
Pairing mode.
Wired Setup
- Connect the camera to your router using the Ethernet
cable, provided. Connect to power. After about 45 seconds, the camera
goes through a Pan/Tilt cycle and the green LED begins to flash
(3-flash/pause pattern), indicating that the camera is in Pairing mode.
Go to
Step 2
in the next section -
Connect Camera and Mobile
Device
.
