10
11
NETWORK SETUP
OVERVIEW
There are two methods of connecting the Guardian App Cam 25 camera to
your mobile device. One method is wireless and the other method has the
camera connected directly to the router using the provided microUSB to
Ethernet cable.
The add camera procedures themselves are identical. In the setup
procedures that follow, the wired connection instructions are noted where
applicable.
PREREqUISITES
•
Your router must support WPA/WPA2 security and it must be turned on.
•
You must have an available WiFi-enabled mobile device (Android or iOS
smartphone/tablet).
•
The Guardian App Cam 25 and your mobile device must connect to the
same WiFi router for setup.
SET UP CAMERA AND SMARTPHONE/TABLET
1. Download the Guardian App (search for Uniden® AppCam™ app) from
the Apple App Store (iOS) or Play Store (Android) onto your device.
2. Connect the antenna to the camera. You can attach the camera stand
to the camera as well but it is not necessary.
3. Wireless Setup
- Connect the camera to power. After about 45
seconds, the red LED is steady on and the green LED begins to flash
(3-flash/pause pattern), indicating that the camera is in Pairing mode.
Wired Setup
- Connect the camera to your router using the microUSB
to Ethernet cable, provided. Connect to power. Go to
Step 2
in the next
section -
Connect Camera and Mobile Device
.
As the Uniden App is constantly under development to enrich user experience, the icons/
screens shown in this manual may vary slightly from the actual app. This OM uses icons
from the Andriod device for most of the steps.
