background image

0

English

General

Shock and Vibration

Meets or exceeds EIA standards, RS152B and 

RS204C

FCC Approvals

Type accepted under part 80 of the Rules; meets Great 

Lakes Agreement and party boat requirements

Transmitter

Power Output

1 watt or 25 watt (user selectable)

Power Requirement

25 watts output: 6A@13.8V DC

Modulation

±5 kHz deviation

Hum and Noise Signal-to-

Noise

45 dB@1 kHz with 3 kHz deviation with 1000 Hz 

modulating frequency (nominal)

Audio Distortion

Less than 8% with 3 kHz deviation with 1000 Hz 

modulating frequency

Spurious Suppression

–25 dBm @ Hi, –25 dBm @ Lo

Output Power Stabilization

Built-in automatic level control (ALC)

Frequency Range

156 to 158 MHz

Frequency Stability

±10 ppm @ –20°C to + 50°C

Receiver

Frequency Range

156 to 163 MHz

Sensitivity

0.25 μV for 12 dB SINAD (nominal)

Circuit

Dual Conversion Super Heterodyne PLL (Crystal for 

DSC)

Squelch Sensitivity

0.2 μV Threshold

Spurious Response

75 dB (nominal)

Adjacent Channel Selectivity

78 dB @ ±25 kHz (nominal)

Audio Output Power

2.5 watts (10% Distortion, 8 Ω load)

Power Requirement

360 mA @ 13.8V DC at squelched, 920 mA @ 13.8V 

DC at maximum audio output

IF Frequencies

1st 41.925 MHz, 2nd 455 kHz (1st 21.7 MHz, 2nd 455 

kHz for DSC)

reFerenCe taBles 

this radio does not support ais channels.

Channel descriptions and what they mean

The table below lists the display name or channel description used in the following tables 

and what each description means. 

Summary of Contents for GMR1235-2






















































Reviews: