27
Basic Tab
FIELD
DESCRIPTION
Enable
Check this to allow sensor operation on a specific channel.
Type
Normally Closed or Normally Open (NC or NO)
Name
Name the alarm.
Alarm Handling Tab
This tab lets you set what triggers alarms and how long those alarms remain active.
FIELD
DESCRIPTION
Holding Time
Set the alarm delay time for a specific channel. Options are 5 sec., 10 sec.,
20 sec., 30 sec., 60 sec., 120 sec., or Always.
Trigger
Select this field to set alarm trigger configuration, trigger recording, PTZ
camera linking (PTZ camera not included), etc. Selecting this field displays
the
Trigger - Channel X
screen for a specific channel.
Name
Name the alarm.
Trigger - Channel X Screen
You may reach this screen from other tabs. It lets you set up what happens when an alarm is
triggered (the camera takes an automatic snapshot, the buzzer sounds, etc), and indicates which
cameras start recording when triggered. It has three tabs:
• Alarm
• To Record
• To PTZ
