9
1. Press and hold the POWER button on the left side of the monitor for 1 - 2
seconds to turn it on.
2. The monitor displays the Uniden title screen and then displays the live view, if
the paired camera has been powered on. Otherwise
Out of Range
message
displays.
Power Up the Monitor
Power Up the Camera
1. Connect one end of a
DC 9V
AC adaptor to the camera’s power pigtail and plug
the other end into a 240 volt AC (standard indoor) power outlet.
2. Cameras provided in the kit are already paired to the monitor. Once they are
powered up, the monitor displays images from that camera.
Adjust the camera viewing position, if needed.
If...
Try...
there is no camera picture
Verify that the power supply adaptor for the
camera(s) is plugged in.
the picture quality is poor
Clean the camera lens.
a white image appears at night
The camera’s infra-red LED shines due to the
invisible light that reflects off surfaces such as
glass, causing white light. Place the camera
on the other side of windows with the lens side
flush against the surface to improve the night
vision, or place the camera in a well-lit area.
Night Vision
This camera has built-in IR LEDs, which provides the camera with the ability to view
images in no/low light conditions. It is important to use the provided power adaptor
(and not the batteries) when using the camera for prolonged periods in low light
conditions.
