TROUBLESHOOTING
• If memory is lost, simply reprogram each channel .
The display shows - - - - - - in all channels when there has
been a memory loss .
• Always press each button firmly until you hear the entry
tone for that key entry .
LOCATION
• Do not use the scanner in high-moisture environments
such as the kitchen or bathroom .
• Avoid placing the unit in direct sunlight or near heating
elements or vents .
• If the scanner receives strong interference or electrical
noise, move it or its antenna away from the source of the
noise . If possible, a higher elevation might provide better
reception .
• Also try changing the height or angle of the antenna .
CLEANING
• Clean the outside of the scanner with a mild detergent .
• To prevent scratches, do not use abrasive cleaners or
solvents . Be careful not to rub the LCD window .
• Do not use excessive amounts of water .
BIRDIES
All radios can receive “birdies” (undesired signals) . If your
scanner stops during Scan mode and no sound is heard, it
might be receiving a birdie . Birdies are internally generated
signals inherent in the electronics of the receiver .
Press / to resume scanning . Or press
(L/O)
to lock out
the channel or frequency .
33
UNIDEN E
Scanner
Summary of Contents for EZI33XLT+
Page 1: ...EZI33XLT Scanner Owner s Manual...
Page 2: ......
