RESETTING THE SCANNER
If the scanner’s display locks up or stops operating
properly, you might need to reset the scanner .
CAUTION:
This procedure clears all the information you have
stored in the scanner. Before you reset the scanner, try
turning it off and on to see if it begins working properly.
Reset the scanner only when you are sure it is not
working properly.
1 . Turn off the scanner .
2 . While holding down and , turn on the scanner .
It takes about 1 second to initialize and
CLEAR
appears .
Keep the scanner dry . If it gets wet, wipe it dry
immediately . Use and store the scanner only in normal
temperature environments . Handle the scanner
carefully: do not drop it . Keep the scanner away
from dust and dirt, and wipe it with a damp cloth
occasionally to keep it looking new .
GENERAL USE
• Always write down the programmed frequencies in the
event of memory loss .
TROUBLESHOOTING
CARE AND MAINTENANCE
32
UNIDEN E
Scanner
Summary of Contents for EZI33XLT+
Page 1: ...EZI33XLT Scanner Owner s Manual...
Page 2: ......
