Uniden EXS9600 Owner'S Manual Download

Page: 4 / 31

Installing and Adjusting Your Phone

DESK/TABLETOP INSTALLATION

1) Plug the AC adapter cord into the 9 VDC input jack on the back of

the base.

2) Wrap the AC adapter cord around the strain relief notch.

3) Plug the AC adapter into a standard 120 VAC wall outlet.

4) Charge the battery (refer to Charging the Battery Pack, page 11).
5) Plug one end of the long telephone cord into the

TEL LINE

jack on

the back of the base.

6) Plug the other end of the cord into your telephone jack on the wall.

AND

ADJUSTIN

YOUR

PHONE

ALLI

INST

ALLIN

G
AND

ADJUSTIN

TIP

Before choosing a location
for your phone, read the
Installation Considerations
included in the Precautions
and Important Safety
Instructions brochure.

Place the power cord so that it does not create a trip

hazard or where it could become chafed and create a fire

or electrical hazard.

Use only the Uniden AC adapter supplied with this phone

and DO NOT use an outlet controlled by a wall switch.

C:\LaDonna\Exs9600\EXS9600.vp

Tue Dec 01 11:28:11 1998

Color profile: Disabled

Composite Default screen

Summary of Contents for EXS9600
































Search results

Summary of Contents for EXS9600

Reviews:

Related manuals for EXS9600

Brands by name

Popular brands

Uniden EXS9600, Owner'S Manual

Search results

Summary of Contents for EXS9600

Reviews:

Related manuals for EXS9600

Brands by name

Popular brands