Uniden EXS 9980 Owner'S Manual Download Page 49

Page: 49 / 62

Deleting a message

Deleting individual message

Press to review your
message.

If you decide to delete a message,
press anytime during the
message. The system beeps and
immediately goes to the next
message.

After you have played all of your
messages, a long tone sounds on the
base speaker.

play/stop

open

backup battery

delete

When you press ,
you are permanently
deleting the message.
Once deleted, the message
cannot be replayed.

Deleting all messages

Press and hold after reviewing your messages. A tone
sounds when all messages are cleared.

delete

Voice memo

The voice memo function allows the user to record a message
(up to 10 minutes) on the base.

Press and hold ,
until you hear a long beep. The
message counter LED blinks.

Speak into the microphone.

When you have finished, press

or to

stop recording. The system returns
to standby.

To play voice memo, press

voice memo

play/stop

open

backup battery

Microphone

The voice memo function
is completely independent
of the outgoing message.
It’s handy for leaving
others a quick message.

A voice memo message
will be stored as a typical
recorded message.

play/stop

Stand within 12 inches in
front of the microphone
and speak clearly.

delete

EXS 9980 4th 99.9.1 2:35 PM Page 49

Summary of Contents for EXS 9980































































Search results

Summary of Contents for EXS 9980

Reviews:

Related manuals for EXS 9980

Brands by name

Popular brands

Uniden EXS 9980, Owner'S Manual

Search results

Summary of Contents for EXS 9980

Reviews:

Related manuals for EXS 9980

Brands by name

Popular brands