Setting Up Your Phone
Raising the Antenna
Before using your phone, be sure to raise its antenna to the
vertical position.
Adjusting Ringer/Volume Controls
▼
Ringer Tone and Volume
1. While the phone is not in use, press
volume
.
2. The phone has two ringer tones, each with two volume levels.
Press
volume
again until you hear the ringer tone and
volume level you want.
▼
Setting the Handset Earpiece Volume
1. While you are on a call, press
volume
.
2. The phone has two receiver volume levels, one soft and one
loud. Press
volume
again until you hear the volume level
you want.
EXP 7903/7904 Charging Cradle
The extra charging cradle is not a replacement for the base. Put it
in a different room than the base so you can conveniently
recharge the phone in the second location.
Example:
You want to use your cordless phone in the kitchen (an
area of high interference). Connect the base in a room with low
interference (without appliances, televisions or computers) then
put the charging cradle in the kitchen.
3. Plug the AC adapter into a standard 120V AC wall outlet that is
not controlled by a wall switch.
4. Place the handset upright in
the charging cradle.
(The
handset can be placed in the
charger with the keypad
facing either the front or back
of the charging cradle.)
The
charge
LED lights while
the unit is charging.
8
Setting Up Your Phone
Raising the Antenna
Before using your phone, be sure to raise its antenna to the
vertical position.
Adjusting Ringer/Volume Controls
▼
Ringer Tone and Volume
1. While the phone is not in use, press
volume
.
2. The phone has two ringer tones, each with two volume levels.
Press
volume
again until you hear the ringer tone and
volume level you want.
▼
Setting the Handset Earpiece Volume
1. While you are on a call, press
volume
.
2. The phone has two receiver volume levels, one soft and one
loud. Press
volume
again until you hear the volume level
you want.
EXP 7903/7904 Charging Cradle
The extra charging cradle is not a replacement for the base. Put it
in a different room than the base so you can conveniently
recharge the phone in the second location.
Example:
You want to use your cordless phone in the kitchen (an
area of high interference). Connect the base in a room with low
interference (without appliances, televisions or computers) then
put the charging cradle in the kitchen.
3. Plug the AC adapter into a standard 120V AC wall outlet that is
not controlled by a wall switch.
4. Place the handset upright in
the charging cradle.
(The
handset can be placed in the
charger with the keypad
facing either the front or back
of the charging cradle.)
The
charge
LED lights while
the unit is charging.
1. Plug the charging cradle
AC adapter connector
into the DC input jack
on the back of the
charging cradle.
2. Wrap the AC adapter cord
around the strain relief.
Set the cradle on a
flat surface.
!
Use only the AC adapter that came with the
charging cradle.
charge
LED
NOTE
The charging cradle does not reset the digital
security code (refer to page 2.)
C:...Exp 7900 series.vp
Tue Oct 06 11:49:11 1998
Color profile: Disabled
Composite Default screen
All manuals and user guides at all-guides.com
