www.uniden.com
note
[ 36 ]
•
When reviewing
memory location you
must press a key
within 30 seconds or
the phone will return
to standby.
5) Press
select/vol/ring
. The display
shows the memory location you
have selected.
6) Press
select/vol/ring
again to enter the “
Edit Memory
” mode.
7) The following screen appears, and a cursor flashes
indicating that the display is ready to edit the name.
8) Entering a stored name - “Use the
number keys,
*
/tone/
,
#/
, or
delete/flash
to edit the name. (See
page 33) To edit only the phone number, skip this step.”
9) Press
select/vol/ring
. The following screen appears.
A cursor flashes indicating that the display is ready
for the number to be edited.
Enter the phone number with the number keypad (direct entry).
Press
delete/flash
to remove any unwanted character.
Press and hold
delete/flash
to clear the entire number.
Press
select/vol/ring
. If you changed either name
or phone number, a confirmation display shows up.
If it is correct, press
/int’c
and press the
select/vol/ring
key again. You will hear a confirmation
tone, and the following screen appears.
The display then returns to the “
Select Memory
” screen. You may select
another number to edit (return to step 3) or press
memory
to return to
standby. To edit a number stored in the base, repeat the steps for storing
numbers in the base. (See page
32.) This will simply overwrite the
number that was previously stored
in the location.
•
If you select “
Go
Back
”, no changes
are made and the
handset shows the
“
Select Memory
”
screen.
Store Number
8007303456
Memory01 Stored
Edit Memory01
Delete Memory01
Go Back
Store Name
Movies
M E M O R Y F E A T U R E S
10)
11)
12)
Replace Memory?
Yes
No
