www.uniden.com
[ 35 ]
GETTING
M E M O R Y F E A T U R E S
MEMORY FEA
TURES
Chain Dialing
Editing a Stored Name and/or Phone Number
To edit a number you have stored in the handset.
1) Pick up the handset from the base.
2) Press
memory
. The display shows
the “
Select Memory
” screen and
any saved names/numbers.
3) Use the
/int’c
and
/conf
, or number keypad, to select the memory
location
(
01-30
)
you would like to edit.
4) Press
select/vol/ring
.
Select Memory
01 Movies
02 JOHN DOE
The 30 memory locations on the handset are not limited to phone numbers.
You may want to store in memory a group of numbers (up to 20 digits) that
you need to enter once your call connects. This is referred to as Chain Dialing.
An example of this is a bank account number. Once you have called your bank,
when you are prompted to enter the account number, simply press
memory
and
then select the location where the special number has been stored.
Store your special number in memory as you would a phone number.
(Refer to “Storing Phone Numbers and Names”, on page 31)
Enter a “pause” in the sequence as necessary. A “pause” counts as one digit
and represents a two second delay in time between digits as they are sent.
