Uniden EXI2960, Owner'S Manual

Page: 13 / 36

G E T T I N G S T A R T E D [ 11 ]
Direct wall mounting
If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing
this, consider the following:
•
Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard
when inserting screws into the wall.
•
Try to mount your phone within 5 feet of a working phone jack to avoid excessive cord lengths.
•
Make sure the wall material is capable of supporting the weight of the base and handset.
•
Use #10 screws (minimum length of 1-3/8 inches) with anchoring devices suitable for the wall
material where the base unit will be placed.
1) Insert two mounting screws into the wall, (with their appropriate anchoring
device), 3-15/16 inches apart. Allow about 1/8 of an inch between the wall and
screw heads for mounting the phone.
2)Set the retainer clip if necessary.
3) Refer to steps 1 through 8 on page 10 to mount the telephone.
GETTING
ST
ARTED
2960_eng combined.qxd 1/22/01 11:50 AM Page 11