9
If.you.make.a.mistake.while.entering.a.name
Use
[ /tone/
]
or
[#/
]
to move the cursor to the incorrect character.
Press
[delete/channel]
to erase the wrong character. Then enter the correct character. To delete all characters,
press and hold
[delete/channel]
.
5) STORE NUMBER is displayed. The cursor flashes indicating that the phone is ready for
the number to be entered.
6) Use the keypad to enter the phone number; each number can be up to 20 digits. If you
need the phone to pause during the dialing sequence, press
[redial/pause]
to insert a
two-second delay between the numbers. You can enter multiple pauses to increase the
delay. Each pause counts as a digit. The display shows a P for every pause.
7) Press
[memory]
. You will hear a confirmation tone, and the following screen appears.
Memory storage is complete.
8) After about 2 seconds, the following screen displays all the speed dial memory entries.
9) Press
[end]
to exit memory setup mode. The phone returns to standby.
Note:.When.storing.numbers.into.memory,.if.the.handset.is.idle.(i.e.,.no.key.is.pressed).for.more.
than.30.seconds,.it.will.beep.rapidly,.and.the.phone.will.return.to.standby.
