Uniden EXAI4248i Owner'S Manual Download Page 52

[ 5 1 ]   N O T E   O N   P O W E R   S O U R C E S

w w w . u n i d e n . c o m

Talk and Standby Times

With average use, your handset battery provides approximately 6 hours of talk time and approximately 7 days of 
standby time. When your handset is not being used and is left off of the charging cradle, the battery will gradually 
discharge. You can achieve optimum battery life and performance by returning the handset to the charging cradle 
after each use. If the handset is left off of the charging cradle, the actual talk time duration will be reduced 
respective to the amount of time the handset is off of the charging cradle.

Cleaning the battery charging contacts

To maintain a good charge, clean the charging contacts 
on the handset once a month.
Dampen a cloth with plain water. Gently rub the damp 
cloth over the charging contacts until all visible dirt is 
removed. Dry the contacts thoroughly before returning 
the handset to the base.

Caution

Do not use paint thinner, benzene, 
alcohol, or other chemical products. 
Doing so may discolor the surface of 
the telephone and damage the finish.

EXAI7248.book  Page 51  Thursday, December 14, 2006  11:57 AM

Summary of Contents for EXAI4248i



































































Reviews: