S E T T I N G U P Y O U R A N S W E R I N G S Y S T E M [ 3 8 ]
w w w . u n i d e n . c o m
Setting the Base Ringer Volume
The base has three ringer volume settings: high, low, and off. You can change the ringer volume
while in standby mode or while an incoming call is ringing.
1) Press the
ringer
key.
You hear the ringer at the current volume level
([
] high, [
] low, [
] off) (if you set the
base ringer volume to off,
"
Ringer off
"
is
announced) and it is displayed on the base.
2) Press the
ringer
key repeatedly until the desired
ringer option appears.
3) The system displays the new ringer volume.
Temporarily Mute the Base Ringer and Call Screen
Press the
(play/stop) key to temporarily mute the incoming ring and call screen. The
ringer will sound with the next incoming call. To turn the ringer back on for this call, press
the
ringer
key. To hear the answering machine and screen this call, press the
or
/volume/select
key.
Adjusting the Speaker Volume Level
You can adjust the volume of the base speaker by pressing the
or
/volume/select
key
on the base. Press the
/volume/select
key for louder or the
/volume/select
key for
softer while the base speaker is being used except for menu mode. The numbers [
] -[
]
are displayed on the base indicating the volume levels. [
] being the softest and [
] being
the loudest.
Although you have set
the base ringer to off,
the handset will still
ring.
note
SE
TTING UP YOUR
ANSWERIN
G
SYS
T
EM
EXAI7248.book Page 38 Thursday, December 14, 2006 11:57 AM
