Uniden EXAI3248 Series Owner'S Manual Download Page 56

Page: 56 / 68

A D D I T I O N A L I N F O R M A T I O N

[ 54 ]

www.uniden.com

Symptom

Severe noise interference.

The Caller ID does not
display.

The answering system does
not work.

The answering system does
not answer calls.

Messages are incomplete.

After a power failure,
the outgoing message is
deleted.

Suggestion

•

Keep the handset away from microwave ovens, computers, remote control
toys, wireless microphones, alarm systems, intercoms, room monitors,
fluorescent lights, and electrical appliances.

•

Move to another location or turn off the source of interference.

•

The handset was picked up before the second ring.

•

The call was placed through a switchboard.

•

Call your local telephone company to verify your Caller ID service
is current.

•

Charge the handset.

•

Make sure the base unit is plugged in.

•

Make sure the answering system is turned on.

•

Set the record time to either the one minute or four minute option.

•

The memory may be full. Delete some or all of the saved messages.

•

The incoming messages may be too long. Remind callers to leave a
brief message.

•

The memory may be full. Delete some or all of the saved messages.

•

Record your personal outgoing message again. The default message should
remain.

EXAI3248_UP004BH UP01004BA_0.Qx 3/14/3 1:35 PM Page 54

Summary of Contents for EXAI3248 Series





































































Search results

Summary of Contents for EXAI3248 Series

Reviews:

Related manuals for EXAI3248 Series

Brands by name

Popular brands

Uniden EXAI3248 Series, Owner'S Manual

Search results

Summary of Contents for EXAI3248 Series

Reviews:

Related manuals for EXAI3248 Series

Brands by name

Popular brands